مشخصات فني


کلمپ آمپرمتر True RMS AC/DC 3284
 دارای خروجی آنالوگ برای اندازه گیری میزان جریان، اندازه گیری شکل موج  فعلی، یا اندازه گیری سطح فرکانس.
نمایش ماکزیمم مقادیر اندازه گیری شده "پیک هلد"
 اندازه گیری میزان حقیقی True RMS
 

CLAMP ON AC/DC HiTESTER 3284



CAT III 600V
Max. rated voltage to earth 600V rms insulated wire
 
Analysis for DC to distorted waves
Analog output for current measuring level, current measuring waveform, or frequency measuring level.
The peak hold function displays the crest value of the inrush current occurring when electrical equipment is started
The AC+DC mode enables measurement of the RMS value of full- or half-wave rectified waveforms
 
 
آمپرمترکلمپی AC/DC 3284
DC Current20.00/ 200.0 A, Basic accuracy: ±1.3 % rdg. ±3 dgt.
AC Current20.00/ 200.0 A, (10 Hz to 2 kHz, True RMS), 
Basic accuracy: ±1.3 % rdg. ±3 dgt.
DC Voltage30.00 V to 600 V, 3 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.
AC Voltage30.00 V to 600 V, 3 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (10 to 1 kHz, True RMS)
Crest factor2.5 and under (1.5 at 200 A, 1.7 at 600 V)
Monitor, Analog outputDC, or AC 1 V/ f.s., Level output, Waveform output: DC to 20 kHz Band-width (±3dB)
Resistance, Continuity checkNone
Frequency1.00 Hz to 1000 Hz, Basic accuracy: ±0.3 % rdg. ±1 dgt.
Other functionAC+DC mode, Maximum/ Minimum/ Average value record function, Data hold, Peak hold, Auto power off, Auto zero
DisplayDisplay refresh rate: 4 times/s (at FAST), 1 time/3s (at SLOW), 4 times/s (bar graph)
Power supply6F22 (Stacked manganese battery) ×1, Continuous use: 25 hours, or AC adapter 9445-02
Core jaw dia.φ33 mm (1.30 in)
Dimensions, mass62 mm (2.44 in) W × 230 mm (9.06 in) H × 39 mm (1.54 in) D, 460 g (16.2 oz)
Supplied accessoriesTEST LEAD L9207-10 ×1, CARRYING CASE 9399 ×1, Hand strap ×1, 6F22 (Stacked manganese battery) ×1, Instruction Manual ×1